Bore diameter
|
40 mm |
Outside diameter
|
100 mm |
Height
|
70 mm |
Basic dynamic load rating, axial
|
59.000 N |
Basic static load rating, axial
|
163.000 N |
Basic dynamic load rating, radial
|
27.500 N |
Basic static load rating, radial
|
53.000 N |
Fatigue load limit, axial
|
14.200 N |
Fatigue load limit, radial
|
7.600 N |
Limiting speed for oil lubrication
|
4.400 1/min |
Limiting speed for grease lubrication
|
1.600 1/min |
Bearing friction torque
|
1 Nm |
Peso
|
1,299 kg |
Maximum diameter of housing shoulder
|
66 mm |
Minimum diameter shaft shoulder
|
48 mm |
Height outer ring over wave washer
|
51 mm |
Width, outer ring
|
18 mm |
Distance to lubrication hole
|
10 mm |
Rip diameter shaft washer
|
65 mm |
Heeldiameter wave washer long
|
50 mm |
Outside diameter wave washer long
|
63 mm |
Width, wave washer
|
11 mm |
Width wave washer long
|
27 mm |
Width heel wave washer long
|
14 mm |
Minimum chamfer dimension
|
0,3 mm |
Minimum chamfer dimension 1
|
0,6 mm |
Diameter lubrication hole
|
3,2 mm |
Pitch circle diameter (holes)
|
80 mm |
Number (screwing holes)
|
8 |
Split
|
45 ° |
Operating temperature min.
|
-30 °C |
Operating temperature max.
|
120 °C |
Rigidity axial
|
2.800 N/µm |
Tilting stiffness
|
1.030 Nm/mrad |
Mass moment of inertia
|
4,35 kg * cm² |
Axial runout
|
1 µm |
Recommended INA precision locknut for radial locking (not included)
|
ZMA40/62 |
Recommended INA precision locknut for axial locking (not included)
|
AM40 |
Tightening torque nut
|
55 Nm |
Required locknut force
|
14.240 N |
Rotary shaft seal to DIN 3760 (not included)
|
50X65X8 |
Size fixing screws DIN EN ISO 4762 10.9 (not included)
|
M8 |
Number of screws
|
8 |
Division (screwing holes)
|
45 ° |
Gabbia in plastica
|
TV |
Stepped shaft locating washer extended on one side
|
L |